How should I maintain my buckling machine?

A long-lasting miniature buckling machine should not only have the correct operation method, but also pay attention to the usual maintenance. The whole machine of miniature buckling machine is a driving force transmission mechanism composed of pulley, tongue seat, tongue block and spindle bearing. The punching die structure is composed of gears, crankshaft connecting rod, straight shaft and left and right dies. The system consists of buffers, gate valves and support rods.

Defining the key components is a prerequisite for the future maintenance of the micro buckling machine. A miniature buckling machine is not just a product, it is a production facility and most importantly, it is actually a device. When the device is used regularly, it needs to be checked for loose or loosened key components. Before each use, grease must be added to the delivery pipeline to reduce coaxial wear caused by dryness and impatience when the equipment is working.

Safety cannot be separated from the focus of frequent inspection of the miniature buckling machine equipment. The mold installation should be inseparable, reliable and sincerely unified. The critical clearance for riveting is adjusted from the lower mold, from high to low. Avoid damaging the equipment by resistance. Adjust the mold shell must meet the quality requirements, suitable for raw material tension. Remember to cut off the power, remove the mechanical equipment and store the raw material when adjusting the mechanical equipment or finishing the work.