How to differentiate between a buckle beater and a nailer?

Generally speaking, automatic buckle machine and automatic nail button machine are different products; but according to the market reflection, the buckle body off the mold of good finish, cavity flat and smooth; fine craftsmanship and other requirements will be the two machines are linked together.

1. Control samples or confirmation samples. See if the color and model match the machine;

2. The surface of the button should be free from cracks, scratches, unevenness and obvious scratches. Whether the buttons are made with a button punch or a nail button machine.

3. The back side should be free of car cracks and bubbles; no bad edges, uneven thickness; this is very important for the operation of the machine.

4. Patterns should be no obvious deformation, no white eyes, white circles and other phenomena, the nail machine can be nailed;

5. Grommets should be round and smooth; pinholes are pierced, symmetrical, no big eyes. If it is a blind button, the blind slot should be smooth, no obvious burst. The adjustment of the machine is important;.

6. After plating or other processes, the effect should be uniform. If some effects are inconsistent, they can be packed separately.

7. The color difference of the same batch of buttons shall not be less than GB250 four standards, compared with the incoming sample shall not be less than GB250 three standards.

8. Packing check, repacking after all qualified in appearance check / customer request performance test. Certificate of Conformity or other labels should be placed inside the package. The number of packages should be in accordance with the regulations, and the actual quantity of each package should be in accordance with the regulations. If it is found out of tolerance due to different thickness or other reasons, then full inspection should be carried out.

9. Snap buttons/cap buttons/five claw buttons should be test-buttoned before shipment to check the performance and usability of the buttons, and to provide customers with samples of punching and test-punching. These are best accomplished with fully automatic button fastening machines;.